When the buffer is running, you need to keep it in contact with the surface of the car then turn it off just before you lift it up. Final Buffer Tips The pad should never touch the ground at any time. If you have a single grain of dirt on the buffer, your car can end up with a lot of scratches and blemishes because of the quick and rotating movement. Use Smooth Cloths When applying your choice of wax, and when buffing your car, you need to make sure that you use a smooth and soft cloth in order to avoid scratching the finish on your car, or spreading the coats of wax on the car s finish unevenly. Though you could probably use an ordinary cloth to apply the wax and to buff the car, but this could be risky, as ordinary cloths, especially those that are not smooth, could contain tiny dirt particles and grime that could affect the end result of your car s detailing job. There are a number of web sites that specifically cater to car paint and will send your order immediately to your doorstep in just a few days after you order and pay. Planning Tips If you plan to repaint your car, you have to consider whether you're going for 100% repaint or just repaint a few panels. Polishing Metal and Chrome These aspects of detailing your car's metal and trim are all designed as finishing touches to enhance your vehicle's overall appearance. Car fanatics will especially be pleased with the bright and shiny appearance of their vehicle if you can perform this aspect of the detailing quite well. The recommended unit will have important characteristics: (1)speed limiter that allows you to set the maximum speed at which the machine will turn, despite the style of the backing plate that comes within the machine, and (2) trigger-regulated variable speed the farther you push, the faster the machine goes. Wax and Polish Give your car a wash and wax treatment prior to the car show. Use car soaps and wash the car under a shade to prevent the sun s heat from affecting your work. If your car has minor scratches, apply polish first before the wax. Polish removes the top layer of the coat and leaves the paint less prone to fading or scratch.