In 1533, a Brunswick citizen is known to have added a treadle, wherein the spinner can rotate the spindle using one foot and still have two hands to freely spin. The flyer was drawn by Leonardo da Vinci, which twists the yarn before it winds onto the spindle. During the 16th century, it was very common to use a treadle wheel with flyer. Rotor spinning allowed the fibers located in the roving to be separated. There is an open end and then twisting and wrapping of the yarn as it is drawn out from the rotor cup. Using the Hands A spinner that turns a crank for flywheel via the hands function to power the hand-powered wheel types. The mechanical engine type uses and presses pedals. The warp are held very firmly and in a parallel pattern, via a loom. The loom is also dressed or warped using the warp threads going through heddles on a couple or more harnesses. The weft thread is wound onto spools also known as bobbins. The Unique Structures The bobbins are put inside a shuttle that will support the weft thread through the shed. They are able to pull the fibers from the cylinder, getting to twist the threads and then winding them to a finished product. When the threads are finished, they can be now dyed and treated with different chemicals so that shrinkage or unnecessary creasing is prevented, if not totally avoided, before they are woven into a particularly patterned fabric. The use of blankets is also practiced to represent how wealthy a particular individual is. In fact, blankets are given away to the other members of the community in order to show prosperity. It is actually because of the high value of blankets that they are even sometimes used as currency for purchasing or bartering others kinds of goods. Afterwards, the fleece should be checked for some short guard hairs because any fiber that is shorter than one inch will not look good after being spun. Thus, the best way is to remove these short and useless fibers and discard of them completely. Getting started Once the wool has been collected, they have to be placed into the electric carders, if electric carding machinery is convenient.